|
Proposed in-space propulsion technologies describe the propulsion technologies that could meet future space science and exploration needs. These propulsion technologies are intended to provide effective exploration of our Solar System and will permit mission designers to plan missions to “fly anytime, anywhere, and complete a host of science objectives at the destinations” and with greater reliability and safety. With a wide range of possible missions and candidate propulsion technologies, the question of which technologies are “best” for future missions is a difficult one. A portfolio of propulsion technologies should be developed to provide optimum solutions for a diverse set of missions and destinations.〔 〕〔 Mason, Lee S. "(A practical approach to starting fission surface power development. )" proceedings of International Congress on Advances in Nuclear Power Plants (ICAPP’06), American Nuclear Society, La Grange Park, IL, 2006b, paper. Vol. 6297. 2006.〕〔 〕 In-space propulsion begins where the upper stage of the launch vehicle leaves off; performing the functions of primary propulsion, reaction control, station keeping, precision pointing, and orbital maneuvering. The main engines used in space provide the primary propulsive force for orbit transfer, planetary trajectories and extra planetary landing and ascent. The reaction control and orbital maneuvering systems provide the propulsive force for orbit maintenance, position control, station keeping, and spacecraft attitude control.〔〔〔 ==Current technology== A large fraction of the rocket engines in use today are chemical rockets; that is, they obtain the energy needed to generate thrust by chemical reactions to create a hot gas that is expanded to produce thrust. A significant limitation of chemical propulsion is that it has a relatively low specific impulse (Isp), which is the ratio of the thrust produced to the mass of propellant needed at a certain rate of flow.〔 A significant improvement (above 30%) in specific impulse can be obtained by using cryogenic propellants, such as liquid oxygen and liquid hydrogen, for example. Historically, these propellants have not been applied beyond upper stages. Furthermore, numerous concepts for advanced propulsion technologies, such as electric propulsion, are commonly used for station keeping on commercial communications satellites and for prime propulsion on some scientific space missions because they have significantly higher values of specific impulse. However, they generally have very small values of thrust and therefore must be operated for long durations to provide the total impulse required by a mission.〔〔Tomsik, Thomas M. "(Recent advances and applications in cryogenic propellant densification technology )." NASA TM 209941 (2000).〕〔Oleson, S., and J. Sankovic. "(Advanced Hall electric propulsion for future in-space transportation )." Spacecraft Propulsion. Vol. 465. 2000.〕〔Dunning, John W., Scott Benson, and Steven Oleson. "NASA’s electric propulsion program." 27th International Electric Propulsion Conference, Pasadena, CA, IEPC-01-002. 2001.〕 Several of these technologies offer performance that is significantly better than that achievable with chemical propulsion. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「In-space propulsion technologies」の詳細全文を読む スポンサード リンク
|